manualshive.com logo in svg

DURKOPP ADLER 878-M PREMIUM, Service Instructions Manual, Page: 13 / 130

Share
Download
DURKOPP ADLER 878-M PREMIUM Service Instructions Manual Download Page 13

Safety

Service Instructions 878-M PREMIUM - 03.0 - 10/2019

11

Examples

Examples of the layout of warnings in the text:

This is what a warning looks like for a hazard that will result in serious 
injury or even death if ignored.

This is what a warning looks like for a hazard that could result in 
serious or even fatal injury if ignored.

This is what a warning looks like for a hazard that could result in 
moderate or minor injury if the warning is ignored.

Puncture

Crushing

Environmental damage

Symbol

Type of danger

DANGER

Type and source of danger!

Consequences of non-compliance.

Measures for avoiding the hazard.

WARNING

Type and source of danger!

Consequences of non-compliance.

Measures for avoiding the hazard.

CAUTION

Type and source of danger!

Consequences of non-compliance.

Measures for avoiding the hazard.

Summary of Contents for 878-M PREMIUM



































































































































Reviews:

No comments