9
Service Manual for Proofer Oven with Touch Screen Controls (TSC)
Oven Fan Cage and Wire Harness Cover
WARNING
BEFORE PERFORMING ANY SERVICE THAT
INVOLVES ELECTRICAL CONNECTION
OR DISCONNECTION AND/OR EXPOSURE
TO ELECTRICAL COMPONENTS, ALWAYS
FOLLOW THE ELECTRICAL LOCKOUT/
TAGOUT PROCEDURE. DISCONNECT ALL
CIRCUITS. FAILURE TO COMPLY CAN
CAUSE PROPERTY DAMAGE, INJURY OR
DEATH.
Figure 3: Oven Fan Cage and
Wire Harness Cover
1. Place the unit’s Power Switch in its OFF position,
and follow the proper Lockout/Tagout procedures.
2. Remove the four screws securing the Oven Fan
Cage to top of the unit. Retain for reuse.
3. Remove the cage to gain access to the Oven Fan
Motor.
4. Remove the screws securing the Oven Fan Wire
Harness Cover to the top of the unit. Retain for
reuse.
5. Remove the Oven Fan Wire Harness Cover to gain
access to the wiring harness and connections.
Proofer Floor Panel
WARNING
BEFORE PERFORMING ANY SERVICE THAT
INVOLVES ELECTRICAL CONNECTION
OR DISCONNECTION AND/OR EXPOSURE
TO ELECTRICAL COMPONENTS, ALWAYS
FOLLOW THE ELECTRICAL LOCKOUT/
TAGOUT PROCEDURE. DISCONNECT ALL
CIRCUITS. FAILURE TO COMPLY CAN
CAUSE PROPERTY DAMAGE, INJURY OR
DEATH.
Heat
Elements
Proofer
Circulating
Fan
Optimist
Assembly
Figure 4: View of Proofer Components
with Floor Panel Removed
1. Place the unit’s Power Switch in its OFF position,
and follow the proper Lockout/Tagout procedures.
2. Remove the screws securing the Proofer Floor
Panel.
3. Slide the panel out through the front of the unit
being careful not to damage the fan blades or
optimist nozzle.
Access to the Proofer Heater Elements, Opti Mist
Assembly, Proofer Circulating Fan is available with
the Proofer Floor Panel removed.
