Du Pont Cyrel FAST 2000TD, Operation Manual

Page: 15 / 106

Functional description
1-5
After each revolution, the heated roller
retracts to avoid hitting the clamp
arms.
The equipment works at a very high
working temperature. To ensure
correct temperatures around the plate
a chiller unit supplies cooled water to
the temperature control system.
Chemical fumes and acrylic granules
produced in the development process
are removed from the inside of the
processor via a suction hood and fed
into a catalyst unit (catox) to be
catalyzed and then removed from the
processor via an external exhaust
system.
Once the full number of revolutions
has been completed, the processor
will automatically position the front
clamp arm in the eject position.
The front clamp arm stops over the
ejection pins. The tension is released
between the front and rear clamp arms
and the ejector pins will activate
upwards and pass through the holes in
the clamp bar, pushing the plate away
from the pins and detaching it.
The stripping finger bar will rise to its
upper position as the plate is pushed
out of the processor through the exit
slot.
January, 2020 Operation Manual | Cyrel FAST 2000TD