Du Pont Cyrel FAST 2000TD, Operation Manual

Page: 20 / 106

2-2
Operation procedures
3. Press the 'On/Off' button.
4. Press the 'Heating - Power ON' to start
heating of the heated roller and the catox.
5. Press the 'Home' button to return to home
view.
6. Now press the 'Initialize' button.
When heated up, the initialization starts
automatically.
NOTE: It will take approx. 40 min. for
the heated roller and the catox system
to reach the set temperature.
7. During initialization the display presents
buttons and processor overview as described
in the following:
• The 'Stop' button will be presented and
the top line will display:
"Preparing for load"
If pressing the 'Stop' button the "Stop -
Finish cycle - No" pop-up dialog will be
displayed. The dialogue will close
automatically after 10 sec. if nothing is
chosen.
• When the initialization process is
complete the home view will display the
'Job selection' area.
Operation Manual | Cyrel FAST 2000TD January, 2020