Du Pont Cyrel FAST 2000TD, Operation Manual

Page: 88 / 106

A-2
Appendix A
Alarm No Description Remedy
002 004 Plate detached from clamp arms Plate loss, please check.
002 005 Clamp Arms, front, speed to low in
tension mode
002 006 Process stopped before plate was
loaded or ejected completely Process was stopped by operator during load or
eject.
002 007 Process stopped while plate was
being processed Process was stopped by operator.
002 008 Plate too short, please unload The loaded plate is shorter than the specified
minimum lenght (450 mm). Please eject.
002 020
002 021
002 022
002 023
002 024
Front Clamp Arm, drive error
Motor could not move as expected.
Check for jammed plates and mechanical failures
before initializing.
If the problem persists, please call an authorized
Service Technician.
Drive power failure. Check the safety circuit and the machine power
supply before initializing.
If the problem persists, please call an authorized
Service Technician.
002 025 Front Clamp Arm, drive error-39022
Battery low warning. Please call an authorized Service Technician.
002 030
002 031
002 032
002 033
002 034
Rear Clamp Arm, drive error
Motor could not move as expected.
Check for jammed plates and mechanical failures
before initializing.
If the problem persists, please call an authorized
Service Technician.
Drive power failure. Check the safety circuit and the machine power
supply before initializing.
If the problem persists, please call an authorized
Service Technician.
002 035 SFA change mode\nMachine can't be
started After finished SFA change, Initialize machine to
proceed.
002 036 Rear Clamp Arm, drive error -39022
Battery low warning. Please call an authorized Service Technician.
003 020
003 021
003 022
003 023
003 024
Heated Roller, drive error
Motor could not move as expected.
Check for jammed plates and mechanical failures
before initializing.
If the problem persists, please call an authorized
Service Technician.
Drive power failure. Check the safety circuit and the machine power
supply before initializing.
If the problem persists, please call an authorized
Service Technician.
003 025 Heated Roller, TCO Tripped Please call an authorized Service Technician.
003 026 IR, Thermal Cut Out (TCO) tripped Please call an authorized Service Technician.
Operation Manual | Cyrel FAST 2000TD January, 2020