Du Pont Cyrel FAST 2000TD, Operation Manual

Page: 33 / 106

Operation procedures
2-15
Ejecting a plate during processor start-up
If a plate is detected inside the processor during
start-up, the control panel will start up in the
'Ready to initialize' view, and then ...
... shortly after change to the 'Eject plate' view.
Press the 'Eject' button to eject the plate from the
processor. The control panel will display the
'Ejecting plate' message.
Remove the plate from the exit slot and await the
'Ready to initialize' message, and then press the
'Initialize' button.
January, 2020 Operation Manual | Cyrel FAST 2000TD