Draytek VigorFly 210 User Manual Download

Page: 137 / 187

VigorFly 210 Series User’s Guide

129

The application for the WDS-Repeater mode is depicted as below:

The major difference between these two modes is that: while in

Repeater

mode, the packets

received from one peer AP can be repeated to another peer AP through WDS links. Yet in

Bridge

mode, packets received from a WDS link will only be forwarded to local wired or

wireless hosts. In other words, only Repeater mode can do WDS-to-WDS packet forwarding.

In the following examples, hosts connected to Bridge 1 or 3 can communicate with hosts
connected to Bridge 2 through WDS links. However, hosts connected to Bridge 1 CANNOT
communicate with hosts connected to Bridge 3 through Bridge 2.

Summary of Contents for VigorFly 210




























































































































































































Search results

Summary of Contents for VigorFly 210

Reviews:

Related manuals for VigorFly 210

Brands by name

Popular brands

Draytek VigorFly 210, User Manual

Search results

Summary of Contents for VigorFly 210

Reviews:

Related manuals for VigorFly 210

Brands by name

Popular brands