Draytek VigorFly 210 User Manual Download

Page: 94 / 187

VigorFly 210 Series User’s Guide

Download -

apply to incoming traffic only.

Upload -

apply to outgoing traffic only.

Download -

apply to both incoming and outgoing

traffic.

Name

Define the name of such rule.

Group

Determine the priority of such rule.

Dest. IP address

Type the destination IP address influenced by such rule.

Src. IP address

Type the source IP address influenced by such rule.

Packet Length

Specify the length of the packets. The adjustable range is
from 0 ~2048.

DSCP

DSCP (Differentiated Services Code Point) allows each IP
packet to be tagged with different service class for different
network transmission. The default setting is "BE".

Protocol

Specify the protocol for such QoS rule.

Dest. Port/Src. Port

It is available when TCP or UDP is selected as the protocol.

Application

It is available when Application is selected as the protocol.
At present, there are eight applications which can be
selected for APP QoS management.

The usage of APP QoS can be seen by clicking

APP QoS

Summary of Contents for VigorFly 210




























































































































































































Search results

Summary of Contents for VigorFly 210

Reviews:

Related manuals for VigorFly 210

Brands by name

Popular brands

Draytek VigorFly 210, User Manual

Search results

Summary of Contents for VigorFly 210

Reviews:

Related manuals for VigorFly 210

Brands by name

Popular brands