VigorFly 210 Series User’s Guide
147
Available settings are explained as follows:
Item Description
Destination
Display the IPv6 routing destination address and prefix
length.
Gateway
Display the IPv6 gateway address.
Flags
Display the routing status.
Interface
Display the interface name (eth0, eth1, fp, etc..) that used to
transfer packets with addresses matching the prefix.
After finishing all the settings here, please click
OK
to save the configuration.
3
3
.
.
1
1
1
1
.
.
5
5
T
T
S
S
P
P
C
C
S
S
t
t
a
a
t
t
u
u
s
s
IPv6 TSPC status web page could help you to diagnose the connection status of TSPC. TSPC
log contains some debug information from program.
If TSPC has not configured properly, the router will display the following page when the user
tries to connect through TSPC connection.
When TSPC configuration has been done, the router will start to connect. The connecting page
will be shown as below:
When the router detects all the information, the screen will be shown as follows. One set of
TSPC prefix
and
prefix length
will be obtained after the connection between TSPC and
Tunnel broker built.
