VigorFly 210 Series User’s Guide
60
Item Description
every host in the LAN.
Start IP Address -
Enter a value of the IP address pool for
the DHCP server to start with when issuing IP addresses. If
the 1st IP address of your router is 192.168.1.1, the starting
IP address must be 192.168.1.2 or greater, but smaller than
192.168.1.254.
End IP Address -
Enter a value of the IP address pool for
the DHCP server to end with when issuing IP addresses.
Subnet Mask -
Type in an address code that determines
the size of the network. (Default: 255.255.255.0/ 24)
Default Gateway -
Enter a value of the gateway IP address
for the DHCP server. The value is usually as same as the
1st IP address of the router, which means the router is the
default gateway.
Lease Time -
It allows you to set the leased time for the
specified PC.
DNS Server IP Address
DNS Manual Setting -
If this function is enabled, LAN
PCs use Primary DNS Server and Secondary DNS Server
as their DNS servers. Otherwise, LAN PCs use the router
as their DNS server and the router will do DNS proxy for
them.
Primary DNS Address -
You must specify a DNS server
IP address here because your ISP should provide you with
usually more than one DNS Server. If your ISP does not
provide it, the router will automatically apply default DNS
Server IP address: 194.109.6.66 to this field.
Secondary DNS Address -
You can specify secondary
DNS server IP address here because your ISP often
provides you more than one DNS Server. If your ISP does
not provide it, the router will automatically apply default
secondary DNS Server IP address: 194.98.0.1 to this field.
If both the Primary IP and Secondary IP Address fields are
left empty, the router will assign its own IP address to local
users as a DNS proxy server and maintain a DNS cache.
If the IP address of a domain name is already in the DNS
cache, the router will resolve the domain name
immediately. Otherwise, the router forwards the DNS
query packet to the external DNS server by establishing a
WAN (e.g. DSL/Cable) connection.
After finishing all the settings here, please click
OK
to activate them.
