VigorFly 210 Series User’s Guide
123
Disable
- Disable IEEE 802.1X Pre-Authentication.
RADIUS Server
Guide you to access into next pop-up window to configure
RADIUS server settings.
Click the link of
RADIUS Server
to access into the following page for more settings.
Available settings are explained as follows:
Item Description
IP Address
Enter the IP address of RADIUS server.
Port
The UDP port number that the RADIUS server is using.
The default value is 1812, based on RFC 2138.
Shared Secret
The RADIUS server and client share a secret that is used to
authenticate the messages sent between them. Both sides
must be configured to use the same shared secret.
Session Timeout
Set the maximum time of service provided before
re-authentication. Set to zero to perform another
authentication immediately after the first authentication has
successfully completed. (The unit is second.)
