12.2.5
AutomationCueMacro Nodes
Each AutomationCueMacro element contains all the parameters associated to one Macro Cue
defined using the Macro Editor GUI presented in the previous sections.
An AutomationCueMacro element contains the subnodes presented in the paragraphs below
.
Figure 80: AutomationCueMacro Structure
Note:
Dotted lines denote optional elements that can be omitted during the creation based on
Macro Editor.
12.2.5.1 Name Node
The Name element is a human-readable annotation corresponding to the name given to this
Macro Cue when it was created. It is the name chosen by the user in Section
6.2.1
for the field
“Name of the Macro”.
12.2.5.2 Id Node
The Id element uniquely identifies the AutomationCueMacro for asset management purposes. It
is encoded as a urn:uuid per [RFC 4122].
12.2.5.3 AnnotationText Node (optional)
This AnnotationText element is a human-readable annotation corresponding to the comment
assigned to this Macro Cue when it was created. It is the name chosen by the user in Section
6.2.1
for the field “Comments”.
12.2.5.4 CommandList Node
The CommandList element contains a list of zero and one or more Command elements. Each
Command element corresponds to the set of parameters describing one automation individual
command composing the Macro Automation Cue.
An empty CommandList can be used to generate an Automation Cue Macro executing no
command. It will be used to maintain portability between theaters.
12.2.6
Command Node (optional)
A Command node contains the parameters associated to a specific command to be used as
part of the overall AutomationCueMacro element. These parameters depend on the type of
command defined by the Type node below.
_____________________________________________________________________________________
SHV.OM.001293.DRM
Page 76
Version 1.3
Doremi Cinema LLC Confidential
