4 ShowVault IP Address
All ShowVault servers are shipped with a default IP address of 192.168.100.50 on the Ethernet
port (Eth1) and a DHCP assigned dynamic IP address on the Ethernet port (Eth0) – see section
3.3
to locate each Ethernet connector.
•
To change the IP address of the ShowVault server, go to “
Menu → System →
Networking Setup
” and follow the steps below:
•
From the ShowVault menu, select “
Menu → System → Networking Configuration
”
•
A window will appear asking for a password as illustrated below:
Figure 17: Authentication Windows
•
Follow the steps starting with the following windows:
Figure 18: ShowVault Network Configuration
•
In the steps that follow use the arrow down or the "Tab" key to select “OK” and then
press "Enter".
•
Enter the desired system’s hostname and select “OK”.
•
Select “OK” for the system’s domain name.
•
Select “Yes” for eth0.
•
Select “No” for "Removable Device".
•
Select “No” for automatically configure device with DHCP.
•
Enter the desired IP address for eth0 and select “OK”.
_____________________________________________________________________________________
SHV.OM.001293.DRM
Page 22
Version 1.3
Doremi Cinema LLC Confidential
System hostname -
"dcp2000" used as an
example
