Doremi ShowVault Installer Manual Download Page 62

Page: 62 / 118

9 ShowVault Software and Firmware USB Upgrade

Instructions

9.1 Displaying the Software and Firmware Versions

•

To display the software version of the ShowVault go to the “

Menu → Doremi Labs, Inc.

→ About

” menu of the ShowVault.

•

The following window will appear on the screen:

Figure 75: “About” Window Software/Firmware Versions

9.2 Updating the Software and Firmware via USB

If the user is unsure about the current software/firmware revisions, contact Doremi Technical
Support for information and downloading instructions. Once the update is downloaded it can be
ingested through the Ingest GUI from a USB drive.

•

Transfer the update file to a USB drive.

•

Plug the USB drive into the ShowVault.

•

Wait for the graphical user interface to appear on the screen as presented below:

_____________________________________________________________________________________

SHV.OM.001293.DRM

Page 62

Version 1.3

Doremi Cinema LLC Confidential

ShowVault software

version

Summary of Contents for ShowVault























































































































Search results

Summary of Contents for ShowVault

Reviews:

Related manuals for ShowVault

Brands by name

Popular brands

Doremi ShowVault, Installer Manual

Search results

Summary of Contents for ShowVault

Reviews:

Related manuals for ShowVault

Brands by name

Popular brands