10.6.2 RAID Reinitialization
•
To reinitialize the RAID type the following command:
•
Type:
sh
/doremi/sbin/reinit_raid.sh
and then press "Enter"
Note:
This is a destructive process and all data (features and trailers) on the hard drives will be
lost.
10.7 Ingest From Ethernet (FTP Server)
10.7.1 Uploading Files to a Remote ShowVault via FTP
This section describes how to send package files from a local Linux machine to a networked
ShowVault for ingest.
•
Open a new terminal window and follow these steps:
•
Type:
cd <
foldername>/
and then press "Enter"
•
The descriptor (
foldername)
is the name of the folder that contains the package files that
are send to the networked ShowVault for ingest
•
An example would be to
type
cd dcp_package/
and then press "Enter"
•
The folder called "dcp_package" contains the source material to be sent to the
ShowVault for ingest
Note:
For this example, it is assumed that the movie package is in a folder called
"dcp_package". In practice, the folder name can be whatever the user decides to name it.
•
Type:
ftp
(
IP address
)
and then press "Enter"
•
The descriptor is the IP address of the ShowVault to send the package files to
•
An example would be to type:
ftp 192.168.100.50
and then press "Enter"
•
User will be prompted for a login name and password for the networked ShowVault
•
Type the following:
•
Name:
ingest
and then press "Enter"
•
Password:
ingest
and then press "Enter"
•
This login will automatically put the user into the "/data/incoming/" folder on the
destination ShowVault. This will bring the user to the FTP command prompt: "ftp >"
•
From here type the following in the terminal window:
_____________________________________________________________________________________
SHV.OM.001293.DRM
Page 68
Version 1.3
Doremi Cinema LLC Confidential
