11 Troubleshooting
11.1 ShowVault BIOS Settings
In case the system does not complete the boot sequence upon powering up, the BIOS settings
may have to be checked. Follow the procedure below to confirm the BIOS settings.
11.1.1 BIOS Setting for SuperMicro X7SBE Motherboard
Note:
The BIOS settings detailed here are for units fitted with the SuperMicro X7BE
motherboard only. Check the motherboard I/Os on the rear panel to know which
motherboard is used on the unit.
•
To access the BIOS settings of the ShowVault fitted with the SuperMicro X7SBE
motherboard press the “Delete”
key after powering on the unit when the SuperMicro load
(splash) screen appears to enter the BIOS configuration.
•
In the “Main” tab the time and date should be set to “GMT” (Greenwich Mean Time)
•
Check that the following is active:
Native Mode Operation
[Serial ATA]
SATA RAID Enable
[Disabled]
SATA AHCI Enable
[Enabled]
SATA AHCI Legacy Enable [Disabled]
•
Go to the “Advanced” menu and choose “Boot Features” - check to see if configuration
matches the format below:
Only USB Port #6 cab boot
[Enabled]
Power Loss Control
[Last State]
•
While in the “Advanced” menu go to “Hardware Monitor” - check to see if configuration
matches the format below:
Fan Speed Control Mode
[3-pin Server]
•
In the “Boot” menu press the “3" key to load the Doremi boot order
•
It will read:
Boot Priority Order:
1. USB HDD:
xxxxName_of_the_Boot_Compact_Flashxxxxx
•
After "Boot Priority" is correctly set press "F10" and confirm by pressing "Enter"
•
The ShowVault will now continue the boot process with the new BIOS settings
_____________________________________________________________________________________
SHV.OM.001293.DRM
Page 71
Version 1.3
Doremi Cinema LLC Confidential
