•
Type:
ftp > prompt off //
- this command turns off prompting for each individual file to
be copied
•
Type:
ftp > mput *
// - this command 'puts' all files from the source directory specified
above (
dcp_package/
) into the "/data/incoming/" directory of the destination ShowVault
•
When completed type
bye
and then press "Enter" at the command prompt to quit the
FTP session
•
The ShowVault will then automatically scan the "/data/incoming/" directory and ingest
the files contained in it
10.8 Changing the Linux Login Password
•
To change the ShowVault login password open a terminal window and do the following:
•
Type:
mount -o rw,remount /
and then press "Enter"
•
Type: password
root
and then press "Enter" (this changes the password for the login
named "root")
•
Type:
password
and then press "Enter" (type the new password)
•
Type:
password
and then press "Enter" (retype the new password)
•
Type:
sync
and then press "Enter"
•
Type:
mount -o ro,remount /
Note:
If changing the "root" password make sure to record the password in a secure place. If
the password is lost, the user will no longer be able to perform "root" privileges or have "root"
rights.
10.9 Changing the Linux Display Resolution
•
To set up the ShowVault display resolution for an external VGA or front panel server
LCD screen do the following:
10.9.1 External VGA
•
Type:
mount -o rw,remount /
and then press "Enter" - allows writing to boot flash
card
•
Type:
cd /etc/X11/
and then press "Enter"
•
Type:
cp XF86Config-4.org XF86Config-4
and then press "Enter"
•
User will be prompted to overwrite the previous configuration
•
Type:
y
and then press "Enter"
_____________________________________________________________________________________
SHV.OM.001293.DRM
Page 69
Version 1.3
Doremi Cinema LLC Confidential
