Docomo F-01A, Instruction Manual

Page: 286 / 519

284
Map/GPS Function
◆
Changing host of service usage setup site <Service host
URL>
Usually, you do not need to change this setting.
1
m
[LifeKit]
7724 e
Set required items
e C
Host : Select a host.
･
When "User setting" is selected, the items below can be set.
User host : Enter up to 99 one-byte characters for the host.
User host URL : Enter up to 100 one-byte characters for URL.
Notify location
Notifying your current location information
You can notify current location information to others (service providers applicable
to Notify location function).
･
To use Notify location, a subscription to a service provider applicable to Notify
location function may be required. And, you may be charged for using the service.
･
Notify location requires usage fee.
･
Notify location is unavailable while positioning with Position location or Location
request, when FOMA terminal is out of service area or in Self mode. Notification
by entering a service client is unavailable in Keypad dial lock.
<Example> Notifying by entering a service client
1
m
[LifeKit]
75
2
2 e
Enter a service client ID (up to 12 one-byte characters)
e g
When positioning, blinks and the light turns on. The GPS alert sound is
emitted and the vibrator operates on completion of positioning.
･
Positioning is stopped when
f
is pressed while a message is being
displayed indicating that a location and phone number are sent or
c
or
f
is pressed while positioning.
･
Even if positioning is interrupted, the location information is notified under
some timing.
Notifying to saved service client :
1 e 1
-
5 e g
3
Check send result
e g
❖
Saving service client to LCS clients list
For Notify location, a service client can be selected from a list of those saved, if any.
You can also set so that your current location is notified to saved service client ID of
a specified party by making a voice/videophone call.
･
Up to 5 items can be saved.
･
No LCS client can be saved, edited or deleted with UIM not inserted.
1
m
[LifeKit]
7711 e
"<New LCS client>"
･
When checking a service client already saved, select the service client to
check and press
C
to edit.
･
Press
m
and select "Delete" to delete a service client already saved. You can
also save it to phonebook, send it via infrared or iC transmission, or copy it to
microSD card from a submenu.
2
Set required items
e C
･
While "Quote phonebook" is selected from the submenu, a service client
name and phone number can be quoted from a phonebook.
Service client name : Enter the service client name in up to 16 two-byte (32 one-
byte) characters.
Service client ID : Enter a number specified by a service provider you
subscribed to in up to 12 one-byte characters.
･
Numerals, "#" and " " can be entered.
Phone number : Enter a phone number of the other party in up to 26 one-byte
characters.
･
Numerals, "P", "T", "+", "#" and " " can be entered. You can set Notify when
calling when a phone number is entered.
Notify when calling : Set if you notify your location to a saved service client ID
when making a voice/videophone call to that client.
･
Set to "ON" to notify the location when making a call.
･
Set to "Confirm each calling" to display a confirmation screen asking if you
notify the location when making a call.
✔
INFORMATION
･
Information is not delivered to the other party under some wave conditions.
･
Even with Notify location set in LCS clients list, location cannot be notified in the cases
below.
- When a call is made without notifying caller ID
- When call is not connected because the other party is busy or out of service area
･
When using 2in1, location information is notified as Number A regardless of mode of
2in1.