Docomo F-01A, Instruction Manual, Page: 347 / 519

345
Convenient Functions
✔
INFORMATION
･
If a Bluetooth device is turned off or not responding while connection is being
established or terminated, the process may take time.
･
If the connection is terminated from a Bluetooth device while Headset Profile, Hands-
free Profile, Advanced Audio Distribution Profile or Dialup Network Profile is
connected, the profile status goes to connection stand-by. When FOMA terminal is
turned off while a profile is connected or connection stand-by, the profile is in stand-by
next time the terminal is turned on.
･
When "Please re-register." is displayed in the service connection status in Device list,
select a Bluetooth device and select "Yes" to register again.
･
When you perform Step 1 with a Bluetooth device not registered, a confirmation screen
for searching appears. Select "Yes" to place the Bluetooth device in connection stand-
by and press
g
to start searching.
･
Even if selecting Dialup Network Profile, the Bluetooth device may not be connected
due to no service on the target device.
◆ Activating/Deactivating Accept registered
Connection from the registered Bluetooth device can be waited or canceled.
1
m
[LifeKit]
*4 e 1
or
2 e
Select a profile
e C
✔
INFORMATION
･
Connection does not start when a Bluetooth device is in connection stand-by. Connect
from FOMA terminal.
･
When Accept registered is activated with multiple Bluetooth devices registered,
unexpected Bluetooth devices may be connected. Be sure to confirm the device
connected.
◆ Turning Bluetooth on/off <Bluetooth ON/OFF>
When "ON" is set, (blue) appears, and a service becomes able to accept a
registered Bluetooth device. Set "OFF" to exit a Bluetooth function.
1
m
[LifeKit]
*1 e
"Yes"
･
You can operate from the sub-display menu.
→
P35
◆
Sending phonebook to a Bluetooth device
1 d e
Phonebook search
e
Move the cursor to a phonebook
entry
e m8 e 5
or
6
2
Select a Bluetooth device to connect
e
"Yes"
･
When "Send all via BT" is selected, perform authentication after the Bluetooth
device is selected. When Bluetooth settings is "With password", enter the
same authentication password on the sender and receiver. Decide a 4-digit
authentication password in advance.
･
The terminal is in the data transfer mode (same state as out of service area)
during data transmission.
◆ Talking using a Bluetooth
You can talk wirelessly by connecting FOMA terminal and a Bluetooth device using
Headset Profile (HSP) or Hands-free Profile (HFP).
･
To dial using Headset service, it operates according to Headset key control.
1
Connecting a Bluetooth device with Headset Profile or Hands-free
Profile
Connecting a Bluetooth device → P344
2
Making/Receiving a call using a Bluetooth device
･
During a communication with Headset Profile, appears, and with Hands-
free Profile, appears.
･
For operations of the Bluetooth device, refer to the operation manual of your
Bluetooth device.
Switching between calls with FOMA terminal and Bluetooth : During a call
n
(for 1 sec. or more)
･
The same operation is available while making/receiving a call, calling/on
hold, recording message/voice memos or movie memos.
･
During a call with FOMA terminal connected with Headset Profile, the call can
be switched only from the Bluetooth device.
･
For operations from the Bluetooth device, refer to the operation manual of
your Bluetooth device.