Docomo F-01A, Instruction Manual, Page: 346 / 519

344
Convenient Functions
◆
Registering a Bluetooth device <Register new devices>
･
Set a Bluetooth device to registration standby mode in advance.
1
m
[LifeKit]
*3 e g
Bluetooth devices in stand-by near FOMA terminal are searched. The number
of the detected devices and the registered device list appear.
a
Device type
: PC : Phone : LAN access point
: Audio device : Peripheral device : Graphic device : Others
b
Search results
: Registered device exists : No registered device
: Unregistered device exists
c
Connection status of the service/Bluetooth address (when the device is not
registered)
appears to the right if the MUSIC Player is subject to be connected
automatically on activation.
d
Device name/Bluetooth address (when the device has no name)
appears when protected.
2
Select a Bluetooth device to register
e
Enter 4-16 digit Bluetooth
passkey
The registration completion screen appears, and the service selection screen (
→ P344) appears after approximately 2 seconds. To connect the Bluetooth
device, go to Step 3 in "Connecting the FOMA terminal and a Bluetooth device"
･
When exceeding the savable number, a confirmation screen for overwriting
appears. When "Yes" is selected, unprotected Bluetooth device with the
oldest communication date is overwritten first.
･
For the Bluetooth passkey, refer to the operation manual of your Bluetooth
device (Bluetooth passkey is not required to register Wireless Earphone Set
02).
･
If the Bluetooth device name exceeds 16 two-byte characters (or 32 1-byte
characters), the truncated device name is registered.
◆
Connecting the FOMA terminal and a Bluetooth device
You can connect a registered Bluetooth device.
1
m
[LifeKit]
*2
2
Select a Bluetooth device to connect
: Connected : Connection stand-by : Unconnected (service exists)
No display : Unconnected (no service)
･
The connect/stop screen appears unless all of the services are online/offline.
Press
1
(or
2
to stop).
Search a Bluetooth device :
C e g
･
If an unregistered Bluetooth device is found, select the device to register.
･
If you, after the search, select a detected Bluetooth device which is already
registered, a confirmation screen for overwriting appears.
Protecting/Unprotecting : Move the cursor to a Bluetooth
device
e m1 e 1
or
2
Displaying registered device information : Move the cursor to a Bluetooth
device
e m2
･
Press
C
on the registered device information screen to edit the device
name. Enter up to 16 two-byte or 32 one-byte characters and press
C
.
Deleting a registered device : Move the cursor to a Bluetooth
device
e m3 e
"Yes"
Disconnecting : Move the cursor to a Bluetooth device
e m4 e
"Yes"
3
Select a profile to connect
e C
appears, and (blue) blinks at the top of the screen when a connection with
the Bluetooth device is established. If no communication is performed with the
Bluetooth device for certain time, Power saving mode starts and (gray) blinks.
Canceling the connection : Select a profile
e C
Reconnect a profile :
I
Device list
a
b
d
c Service selection screen