Docomo F-01A, Instruction Manual

Page: 428 / 519

426
Appendix/Troubleshooting
● Work area full. Quit other applications.
For the lack of memory space for operation, quit
other applications.
● Unable to switch to data transfer mode.
As FOMA terminal is performing communication,
data transfer mode cannot be set. Try again after the
communication ends.
● Unable to update pattern definitions.
Updating the pattern definitions has failed. Stop all
other functions currently running and retry the
update in a place with good radio wave conditions.
● Unable to use data type.
Data in a file format incompatible with FOMA
terminal cannot be moved/copied from a microSD
card to FOMA terminal or searched for.
● Unable to use this function
With 2in1 in B mode, messages cannot be created.
● Unmatched to saved fingerprint.
Retry fingerprint authentication or perform
authentication operation with terminal security code.
Note that authentication with terminal security code
is disabled when Fingerprint access is "ON".
→ P110,
114
● URL address changed.(301)
The site or website automatically performs URL
transfer or the URL was changed.
● URL address is not valid.(xxx)
Make sure the URL.
● Usage is currently restricted. Try again later.
This message appears when a very large volume of
data was sent or received in a predetermined period
of time with the i-mode packet flat-rate service used.
Connection may be disabled for a predetermined
period of the time; use i-mode after a while.
●
Unable to start fingerprint sensor.
Failure in Fingerprint sensor. Contact the numbers
for "General Inquiries" on the back of this manual.
● You have no certificate. Connect?
The user certificate has not been downloaded.