Docomo F-01A, Instruction Manual

Page: 22 / 519

20
Easy Search/Contents/Precautions
Waterproofness
F-01A is waterproof to IPX5 (former JIS protection code 5)
*1
and IPX7 (former JIS
protection code 7)
*2
standards if the external connection jack cap is strictly closed
as well as the back cover is mounted and locked.
*1
IPX5 means that F-01A phone keeps functioning after directly applying a jet flow of 12.5 L/
min. for at least 3 minutes from a distance of 2.5-3 m on a rotating turntable.
*2 IPX7 means that F-01A phone keeps functioning after it is slowly submerged to depth of 1 m
in static tap water at room temperature, left there for 30 minutes and then taken out.
❖
Advantages in actual operation
・
You can talk or watch 1Seg programs without using an umbrella in the rain (for
rainfall of 20 mm or less per hour).
*
When your hands or FOMA terminal are wet, avoid installing/removing the back cover or
opening/closing the external connection jack cap.
・
You can wash the FOMA terminal by submerging and moving it forth and back in
still water in a basin etc.
*
When washing, use only your hands, not a brush or sponge, with FOMA terminal locked,
the back cover installed and the external connection jack cap held in position.
・
You can use the FOMA terminal in a poolside area. Do not put the terminal in the
water of a swimming pool.
*
If FOMA terminal gets wet with water from the swimming pool, wash it as described above.
*
Do not use FOMA terminal underwater. May cause malfunction.
・
You can use FOMA terminal in a bathroom. Do not put the terminal in the bathtub.
*
Never put FOMA terminal in hot spring water or water containing soap, detergent or bath
powder.
*
Do not use FOMA terminal underwater. May cause malfunction.
◆
Important precautions
To keep the FOMA terminal waterproof, be sure to observe the points below.
・
Securely close the external connection jack cap and back cover.
・
Make sure that the cap and back cover are completely closed without floating.
・
Before using, make sure that the back cover lever is at the LOCK position.
■ Closing external connection jack cap
■ Installing back cover
Align 8 tabs of the back cover with concaves of FOMA terminal. While pressing the
back cover in the direction of
a
so that there is no gap between FOMA terminal and
back cover, slide the back cover in the direction of
b
to install, then slide the back
cover lever in the direction of
c
to lock.
・
Do not use FOMA terminal underwater (including opening/closing and keypad
operations).
b
a
Back cover
c
Lever