Docomo F-01A, Instruction Manual, Page: 369 / 519

367
Network Services
◆
Setting 2in1
Set each option with 2in1 ON.
1
m
[Settings & NW services]
87 e
Authenticate
e
"Yes"
e
Operate by selecting a menu
item
･
If 2in1 is already ON, 2in1 setting screen appears after the authentication.
<2in1 Mode switching>
[2in1 Mode switching] :
1 e 1
-
3
<2in1 setting>
[2in1 setting] :
2 e
Select a mode
e
Phonebook
e
Select a phonebook
entry
e C e
"Yes"
Phonebook display depends on the mode you selected.
･
For "Common", Phonebook entries appear in both A and B modes.
: Phonebook entries in A mode : Phonebook entries in B mode
: Phonebook entries in both A and B modes
<Stand-by for mode>
[For Dual mode] :
31 e
Select a folder
e
Select an image
e
"Yes"
[For B mode] :
32 e
Select a folder
e
Select an image
e
"Yes"
<Set call/receive No.>
[Ring alert for No.B] :
41 e 1
-
3
･
Setting operations are the same as the one for Ring alerts & Sounds.
･
Ring alert sounds according to this setting regardless of the setting of Notify/
Not notify of caller ID.
[Identification mark] :
42 e
Set required items
e C
Text strings such as " 発信中 (Dialing)" in Identification mark with Mark set to ON
is decorated on the incoming/outgoing call or calling screen.
･
The setting of Number A also applies to Identification mark.
<2in1 function OFF>
[2in1 function OFF] :
5 e
"Yes"
<Receive avoidance>
[Change rcv. avoidance] :
61 e
Set required items
e C
Incoming calls from the number with Receive avoidance applied is restricted in
any mode.
･
Mode link for avoid. should be deactivated.
[Check rcv. avoidance] :
62 e
"Yes"
･
You can change settings from the submenu.
[Mode link for avoid.] :
63 e
"Yes"
When activated, only Number A is accepted in A mode and so is Number B in
B mode.
･
When activated, 2in1 mode switching is unavailable out of service area.
[Rcv. avoidance(Int.)] :
64 e
"Yes"
･
You need to deactivate Mode link for avoid.
･
If operated overseas, an international call fee for the country where you stay
is charged.
✔
INFORMATION
<2in1 mode switching>
･
Even when 2in1 is OFF, you can set 2in1 to ON and activate 2in1 mode switching by
holding down
2
for 1 second or more and performing authentication. When 2in1 is
ON, you can activate 2in1 mode switching in the same way.
<2in1 setting>
･
When you subscribe to 2in1 for the first time, all saved phonebook entries at the time
are set to "A". If you re-subscribe to 2in1, the previous 2in1 setting is used.
❖
2in1 function in each mode
Only items with different actions depending on modes are listed (items with same
actions as in A mode are excluded).
Service A mode B mode Dual mode
Voice/
Videophone
Calls Call Number A Number B Select when
dialing
*1
Receive
*2
Depend on Receive avoidance
Phonebook Display
*3
"A" "Common" "B" "Common" All
Name conversion
*4
"A" "Common" "B" "Common" All
New entry "A" "B" "A"
Receive all items via
infrared
communication or iC
transmission Depend on Ph.book 2in1 setting at sending side
*5
Receive 1 item via
infrared
communication/iC
transmission "A" "B" "A"
Copy all items from
microSD card Depend on 2in1 setting when copying
*5