Docomo F-01A, Instruction Manual

Page: 217 / 519

215
1Seg
Before using 1Seg
■
1Seg watching procedures
Create and set the channel list corresponding to the area where you watch 1Seg.
→ P215
Start 1Seg. → P216
■ 1Seg antenna
･
The terminal has a built-in 1Seg antenna. To best use 1Seg, do not cover the
antenna with your hand.
→ P26
■ When a call is received or alarm time comes while Seg watching
･
In flip style, the new task starts. In vertical display, 1Seg and the new task are
displayed in Multi window (
→ P220). After the task is terminated, 1Seg resumes.
✔
INFORMATION
･
1Seg watching is interrupted if i-
α
ppli is activated. By pressing
T
for 1 second or
more, you can switch 1Seg watching and i-
α
ppli.
･
Note that DOCOMO assumes no responsibility whatsoever for any loss or modification
of saved contents resulting from malfunction, repair or other handling of FOMA
terminal.
When changing the model of or repairing FOMA terminal, information (still images
recorded by 1Seg, TVlink, information saved in the storage area, etc.) saved in the
terminal cannot be transferred.
･
Watching 1Seg long time while charging may reduce the battery pack lifetime.
Setting channels
To watch 1Seg, you need to create a channel list of broadcasting stations and
saved channels, and set it according to the area. Up to 10 items can be saved.
◆ Creating Channel list
Channel list can be created in either of the ways below.
Use preset : Broadcasting stations and channels that can be received are saved in
advance by area. Select from the area list.
Auto setting : Broadcasting stations and channels that can be received in your
current location, are automatically searched and set. Perform this within the
terrestrial digital TV broadcasting service.
･
Channels in a preset may not be available depending on the place you watch. In
that case, use Auto setting.
1
m
[LifeKit]
97 e C
･
A confirmation screen appears if there is not channel list.
2
Select a method to create
Setting from a preset : "Use preset"
e
Select an area
e
Select a
prefecture
e
Select a local municipality
･
For some areas, selecting prefecture or local municipality may be omitted.
Creating by automatic search : "Auto setting"
e
"Yes"
e
Select an area
Auto setting starts and, upon completion, a confirmation screen appears.
･
Select "No" to display an auto-scanning channel setting screen. At this time,
channel list is named after the date and time of setting.
･
A channel of the selected area is searched for by priority.
･
To interrupt Auto setting, press
g
and select "Yes".
3
"Yes"
Channel list is created.
✔
INFORMATION
･
It takes approximately 60 seconds to search for channels in Auto setting. It may take
longer time depending on the number of broadcasting stations and airwave conditions.
･
Auto setting performed near a noise source such as a PC or LCD TV may require a time.
･
While Auto setting is set, system sound is not generated.
･
Auto setting is unavailable while recording.
Step 1
Step 2