Docomo F-01A, Instruction Manual, Page: 145 / 519

143
Mail
Receiving and handling i-mode mail
Mail auto receive
When you receive i-mode mail
1
Receive an i-mode mail
and blink and "Receiving messages
…
" appears.
Mail ring alert sounds, the light turns on or blinks, and the reception result
screen appears.
The received i-mode mail is saved in a folder of Inbox.
･
g
: Cancel receiving
The mail may be received depending on the radio wave conditions.
a
Icon
: Unread i-mode mail exists : Unread i-mode mail and SMS exist
b
Reception result ticker
c
Number of received i-mode mails
･
If you do not press any key for about 15 seconds after the reception result
screen appears, the previous screen automatically reappears.
When reception has failed
"
×
" appears on the right side of "Mail" on the reception result screen. To receive
again, perform i-mode inquiry.
✔
INFORMATION
･
When multiple mail and/or MessageR/F are received at the same time, the terminal
operates depending on the conditions set for the mail or MessageR/F received last.
･
Up to 100 Kbytes of i-mode mail including its attachments can be received
automatically. Attachments larger than 100 Kbytes can be downloaded manually from
i-mode Center.
→ P145
･
When the memory space is not enough or when exceeding the savable number, the
unread or unprotected received mails are overwritten chronologically. A large number
of existing mails may be deleted depending on the size of the received mail.
･
In the cases below, received i-mode mail is stored in the i-mode Center.
- When the power is OFF or out of i-mode service area
- During a videophone call or a PushTalk session
- Accessing Data Center
- In Omakase Lock or Self mode
- During FirstPass center connection
- When reception has failed
- When receiving SMS
- When Receive option setting is "ON"
- During infrared communication/iC transmission
- When storage area is filled with mail unread or protected
･
If there is not enough memory space available because memory is filled with unread
and protected mails, reception of i-mode mail is stopped,
and appear on the
screen. To receive, you need to display the contents of unread mail, delete or unprotect
unnecessary mail.
･
If there are remaining i-mode mail in the i-mode Center, or appears. It may not
appear even when there is i-mode mail. When exceeding the savable number in the i-
mode Center, the icon changes to
or .
◆ Displaying newly-received i-mode mail
1
On the reception result screen,
1
･
MessageR/F can be displayed by pressing
2
or
3
.
2
Select a folder
e
Select a mail
Playing Flash graphics with a melody or sound effect → P159
Reading received mail details screen → P150
Blinking
c
Receiving screen Reception result screen
Blinking
a
b