Docomo F-01A, Instruction Manual, Page: 117 / 519

115
Security Settings
■ When Fingerprint access is "ON"
Press
mn
on the stand-by display, enter the emergency call number and
press
n
.
･
To start both IC card lock and All lock, start IC card lock → All lock in sequence. →
P266
･
The microSD card and UIM remain unlocked.
1
m
[Settings & NW services]
413 e
Authenticate
"All locked." appears on the stand-by display.
Canceling : Enter the terminal security code
･
If fingerprint authentication is set, press
m
and perform authentication.
･
Unlocking in flip style → P41 " ■ Authentication"
✔
INFORMATION
･
PushTalk calls received in All lock are rejected and the callers hear the busy tone. It
appears in Received calls when All lock is canceled.
･
A call is received regardless of the settings of Specified caller.
･
Even if a stand-by display or Machi-chara is set, only the image set by default is
displayed.
･
All lock precedes even when Lock on close or Auto keypad lock is set to "ON".
･
The alarm clock and schedule reminder do not operate even when the specified date
and time arrive. Activation by watching reservation or recording reservation of 1Seg
does not occur.
･
Even when the specified date/time comes, Timed theme is not switched. When
canceling All lock, Timed theme not in operation start in order.
･
Bluetooth ON/OFF becomes "OFF" even if it is set to "ON". The previous setting is
restored after All lock is canceled.
･
The functions below are available.
- Receiving voice/videophone calls
*1
, making emergency call (110, 119, 118)
- Automatic update of Data Center
- Receiving i-mode mail, MessageR/F, SMS
*2
- Receiving Area Mail, activating Omakase Lock
- Receiving i-
α
ppli call
*3
or obtaining ToruCa from IC card reader
- Operations for location request of GPS
*4
- Updating software, auto-updating pattern definitions.
*1
Only a phone number is displayed, but the other party's name or image saved in phonebook does
not. The incoming image, ring alert and other settings are reset to default settings, and the default
image is displayed as videophone substitute image. Chaku-moji can be received, but it is not
displayed on the incoming call screen. It is displayed in Received calls when All lock is canceled.
*2 No receiving actions such as displaying the receiving or reception result screen, emitting ring alert
are taken.
*3 Automatic reception is available, but none of receiving actions such as displaying a confirmation
screen for responding, emitting ring alert are not taken.
*4 Even when the requester ID of Location request matches with a phonebook entry, the requester's
name is not displayed.
Omakase Lock
Using Omakase Lock
This service allows you to lock the personal information of phonebook etc. or IC
card function of Osaifu-Keitai only by contacting DOCOMO in case FOMA terminal
is misplaced etc. You can protect your important privacy and Osaifu-Keitai with
this service. And, when Omakase Lock is unavailable at your application and
communication becomes available within one year, Omakase Lock is activated
automatically. Note that, when you cancel/suspend the line, change the phone
number, or change your current subscription to mova within one year, Omakase
Lock is not activated automatically.
FOMA terminal can be unlocked upon your request, etc.
* Omakase Lock is a charged service. If you subscribe to this service at the same time as service
interruption or during interruption, or if you are the member of docomo Premier Club, no
charges occur. And, if you subscribe to Keitai Anshin Pack, you can use the service within the
fixed charge of Keitai Anshin Pack. Even in Omakase Lock, if Request permit/deny is "Always
permit", FOMA terminal responds to location request of GPS function.
Setting/Canceling Omakase Lock
0120-524-360 Office hours : 24hours
* Omakase Lock can be set/canceled from My docomo site using a PC etc.
･
For details of Omakase Lock, refer to "Mobile Phone User's Guide [i-mode] FOMA
version".
❖
When Omakase Lock is activated
"Omakase Lock active." appears on the stand-by display.
･
Operations except turning power ON/OFF, receiving voice/videophone calls, or
reactions to Location request are unavailable and the IC card functions are also
unavailable. Note, however that the microSD card and UIM remain unlocked.