manualshive.com logo in svg

Dilon Navigator 2.0, User & Service Manual, Page: 8 / 43

Share
Download
Dilon Navigator 2.0 User & Service Manual Download Page 8

Navigator 2.0 User Manual & Service Guide 

N2-5000-07-001 Rev 7 

-

8-

 

Revised 10/16/2018 

 

www.Dilon.com

 

Table 1A. Explanation of Symbols (Continued)

 

 

Battery Power Level 

 

Caution: High Voltage  

 

ON/OFF 

 

 

 

Wireless Capability 

 

 

 

Acceptable shipping conditions: -15° C to 40° C  

 

WEEE Symbol (EU only) 

 
FCC statements

: “This device complies with part 15 of the FCC Rules.  Operation is subject 

to the following two conditions: (1) This device may not cause harmful interference and (2) 
this device must accept any interference received, including interference that may cause 
undesired operation.” 

 
IC statements

: “This device complies with Industry Canada license-exempt RSS 

standard(s). Operation is subject to the following two conditions: (1) This device may not 
cause interference and (2) this device must accept any interference, including interference 
that may cause undesired operation of the device.” 

 
Cet appareil est conforme avec Industrie Canada RSS exemptes de licence standard (s). 
Son fonctionnement est soumis aux deux conditions suivantes: (1) Ce dispositif ne doit pas 
causer d

’interférences, et (2) cet appareil doit accepter toute interférence, y compris les 

interferences qui peuvent causer un mauvais fonctionnement de l

’appareil. 

Summary of Contents for Navigator 2.0












































Reviews:

No comments