Navigator 2.0 User Manual & Service Guide
N2-5000-07-001 Rev 7
-
20-
Revised 10/16/2018
www.Dilon.com
The connector has a locking mechanism. To
disconnect
the cable from the probe and from the
gain module,
pull directly back on the hood; DO NOT pull or twist the connector jacket.
4C-2. 6mm Diameter Cable (Part # GP-4001-00)
A different cable is used for the standard lymphatic mapping probes (straight or angled), Superficial
Head & Neck Probe, laparoscopic probes, and the Daniel
™ Lung Probe. This cable has five
receptacles inside the probe end, and seven pins inside the plug, that connect to the control unit. The
cable is approximately 6mm in diameter.
Connect the cable to the control unit, matching the arrows on the cable connector to the arrow above
the signal input port.
The connector is a locking connector. To
disconnect
the cable from the probe and from the control
unit,
pull directly back on the hood
;
DO NOT pull or twist on the jacket
.
WARNING!
Do not pull or twist the
jacket
of the cable, to remove from control unit. You must
pull on the
hood
at the end of the cable.
Pulling or twisting the jacket may
damage the cable and render it unusable.
Summary of Contents for Navigator 2.0
Page 4: ......