Navigator 2.0 User Manual & Service Guide
N2-5000-07-001 Rev 7
-
27-
Revised 10/16/2018
www.Dilon.com
Probe, Daniel Lung Probe, and Laparoscopic Probes - Settings and Indicators (just prior to
surgery)
Control/Indicator
Setting (with Tc99 example)
Controls (back of Control Unit)
SCAN/Calibrate:
SCAN
Isotope:
Tc99
Indicators (front of the Control Unit)
Range:
1x
Threshold:
Illuminated
Display:
0
Isotope:
Tc99
6B-2. During Surgery
·
See
‘
Useful Adjustments that can be made During Procedures’
.
·
See
‘
Optional Co-Pilot Device’
.
6B-3. After Surgery
·
See:
‘
Cleaning, Disinfection, and Sterile Use of Probes and Cables’ (Dilon doc. # 141-00005).
NOTE:
The time to charge a battery by the charger may take as long as 3.5 hours.
NOTE:
Keep control unit powered off until all components are connected. This helps preserve
component life.
Cautions for Thoracoscopic, Laparoscopic, and Endoscopic Procedures:
CAUTION:
Trocars should be placed in accordance with standard laparoscopic and thoracoscopic
techniques, with specific regard to target organ geometry to assure probe access to
the target organ. Please reference current trocar labeling suggesting working
knowledge of laparoscopic techniques and familiarization with trocar placements
under direct visualization through a laparoscope.
CAUTION:
Endoscopic procedures should be performed only by physicians having adequate
training and familiarity with endoscopic techniques. In addition, medical literature
should be consulted relative to techniques, complications and hazards, prior to the
performance of endoscopic procedures.
Summary of Contents for Navigator 2.0
Page 4: ......