Dilon Navigator 2.0, User & Service Manual, Page: 34 / 43

Navigator 2.0 User Manual & Service Guide
N2-5000-07-001 Rev 7 -
34-
Revised 10/16/2018
www.Dilon.com
8. Specifications
9A. Navigator 2.0 System Specifications
The Navigator 2.0 system consists of the control unit, one or more probes, and the system
accessories.
Table 9A-1. Navigator 2.0 System Specifications
Item Description
Control Unit Power Source Replaceable, internal battery
Battery Rechargeable Smart Lithium Ion Battery; 10.8V (nominal)
voltage, 8.7Ah (nominal) capacity, 94Wh SOC (state-of-
charge) indicator.
Approximate weight: 470g
New Battery Charge Life
– full
charge
Approximately 10-12 hours continuous use (nominal)
Battery Recharge Cycle -100%
discharge
300 full charge/discharge cycles at room temperature and
under normal discharge rates.
Wireless Pilot Probe Power
Source
Battery. Single use CR2, 3 V Lithium; capacity 750-850
mAh
Wireless Pilot Probe
Transmission Distance
Up to 9 meters
Industry Standard Wireless
Operating Frequency
2.4 GHz.
Fuse
– Control Unit
UL/CSA (198G) standards; 0.75 amp. Glass housing. 250
volt rating. 5x20m.
IEC 127 standards: Type 7. 0.75 amp,
250 volts. 5x20m T0.63AL250V.
Sound Indicators Pitch variations - Frequency proportional to event rate.
Upon completion of 10-second count, device emits double-
beep sound.
Visual Indicators
Control Unit:
·
Digital count
– Vacuum fluorescent display
·
Single count
– LED
·
Calibration-check - LED
·
10-second count
– LED
·
Battery energy level
– LED
·
Range 1X/10X/100X
– LED
·
Isotope
– LED (four)
Battery:
·
Battery state-of-charge
– 4 LED’s
Wireless Pilot Probe
:
·
Probe connection
– LED
·
Isotope Indicator
– LED