Removing and Replacing Field Replaceable Units
3.9 Removing an RRD42 CD–ROM Drive
3.9.1 Separating the RRD42 CD–ROM Drive from the Mounting Bracket
When you install a replacement RRD42 CD–ROM drive, you must use the
mounting bracket (74-42449-01) that is attached to the faulty RRD42 CD–ROM
drive (RRD42-AA). To separate the mounting bracket from the faulty RRD42
CD–ROM drive, follow these steps:
1. Note how the bracket is attached in relationship to the RRD42 CD–ROM
drive.
2. Remove the four screws (90-10961-03) that secure the mounting bracket to
the RRD42 CD–ROM drive (refer to Figure 3–26).
3. Separate the mounting bracket from the RRD42 CD–ROM drive.
Note
The following illustration shows how the mounting bracket is attached
when the RRD42 CD–ROM drive is mounted in the left-hand position.
If yours is mounted in the right-hand position, the bracket will be
reversed.
Removing and Replacing Field Replaceable Units 3–39
