Removing and Replacing Field Replaceable Units
3.15 Removing the DSW42 Synchronous Communications Option
Figure 3–38 Removing the DSW42 Logic Board
Standoff Pillars (2)
DSW42 Logic Board
CPU Module
MLO-009880
2. Press the latch on the other standoff pillar and push up that corner of the
DSW42 logic board until the DSW42 logic board is released.
3. Push up the DSW42 logic board until the connectors on the DSW42
logic board disengage from the connectors on the CPU module (refer to
Figure 3–38).
4. Remove the DSW42 logic board from the enclosure.
3.15.2 Removing the DSW42 Input/Output Cable
To remove the DSW42 input/output cable, follow these steps:
1. Disconnect the DSW42 input/output cable from the CPU module (refer to
Figure 3–39).
2. Disconnect the DSW42 input/output cable from the DSW42 input/output
module on the back of the enclosure (refer to Figure 3–39).
Removing and Replacing Field Replaceable Units 3–61
