Installation Procedures
2.3 Installing the BA42B System
2.3.2.6 Connecting the System Unit Power Cord
A VAX 4000 Model 100A/105A accepts 100 V ac to 120 V ac at 50 Hz or 60 Hz,
or 220 V ac to 240 V ac at 50 Hz or 60 Hz. The power supply is self-sensing.
You do not have to select the input voltage. To connect the system power cord,
follow these steps:
1. Set the on/off switch on the back of the system to the off (O) position.
2. Connect the power cord, supplied with the system (see Figure 2–2), to the
ac power socket on the back of the system (see Figure 2–15).
3. Connect the other end of the power cord to a grounded power outlet.
Figure 2–15 Connecting the Power Cord
1
3
2
MLO-010204
1
Power cord
Installation Procedures 2–25