manualshive.com logo in svg

DigiDesign Digi 002, Getting Started

Share
Download
DigiDesign Digi 002 Getting Started Download Page 96

Getting Started with Digi 002 & Digi 002 Rack

88

Edit Tools

Pro Tools LE has seven Edit tools: Zoomer, Trim-
mer, Selector, Grabber, Scrubber, Pencil, and 
Smart Tool. Select an Edit tool by clicking it in 
the Edit window. The Zoomer, Trimmer, Grab-
ber, and Pencil tools have multiple modes, 
which you can select from a pop-up menu when 
you click the tool.

Editing Regions

The Edit tools in Pro Tools LE are used to edit re-
gions in the Edit window. 

Trimming Regions

After recording an audio track, you will have an 
audio region on that track. If there is some si-
lence at the beginning of the region, or there is 
some extra audio at the end of the region, you 
can use the Trimmer tool in Slip mode to 
shorten the beginning or end of the region.

To trim an audio region:

1  

Select Slip mode.

2  

Select the Trimmer tool.

3  

Move the cursor near the beginning of the au-

dio region (notice the cursor displays as a “[”).

4  

Click at the beginning of the region and drag 

right to shorten the region.

5  

Move the cursor near the end of the audio re-

gion (notice the cursor displays as a “]”).

Edit tools in Edit window

Press the Escape key to toggle through the 
Edit tools.

For detailed descriptions of the Edit Tools, 
refer to the Pro Tools Reference Guide.

Audio region

Zoomer

Trimmer 

Selector 

Grabber 

Scrubber

Pencil

Smart Tool

Audio region on a track

Trimming the beginning of a region

Trimming the end of a region

Summary of Contents for Digi 002


























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands