manualshive.com logo in svg

DigiDesign Digi 002, Getting Started

Share
Download
DigiDesign Digi 002 Getting Started Download Page 12

Getting Started with Digi 002 & Digi 002 Rack

4

Hard Drive Considerations

Hard Drive Configuration and 
Maintenance

It is recommended that you start with a newly 
initialized audio drive. You should also periodi-
cally defragment your audio drive to ensure 
continued system performance.

For a list of qualified hard drives, see our 
Web site (www.digidesign.com/compato).

If you are using an ATA/IDE or FireWire hard 
drive, initialize your drive with Windows Disk 
Management (Windows) or the Disk Utility ap-
plication included with Apple System software 
(Macintosh).

Avoid Recording to System Drives

Although Pro Tools LE will let you record to 
your system drive, this is generally not recom-
mended. Recording and playback on system 
hard drives results in lower track counts and 
fewer plug-ins. 

Hard Disk Storage Space

Mono audio tracks recorded with 16-bit resolu-
tion at 44.1 kHz (CD-quality) require approxi-
mately 5 MB of hard disk space per minute. 

The same tracks recorded with 24-bit resolution 
require about 7.5 MB per minute. Recording at 
higher sample rates (88.2 kHz or 96 kHz) re-
quires about twice the hard disk space. 

Table 2 lists the required disk space for certain 
track numbers and track lengths, to help you es-
timate your hard disk usage.

Table 2. Required hard drive space for audio tracks

Number of 
tracks and 
length

16-bit at 

44.1 kHz

16-bit at 

48 kHz

24-bit at 

44.1 kHz

24-bit at 

48 kHz

16-bit at 

88.2 kHz

16-bit at 

96 kHz

24-bit at 

88.2 kHz

24-bit at 

96 kHz

1 mono track
1 minute

5 MB

5.5 MB

7.5 MB

8.2 MB

10 MB

11 MB

15 MB

16.4 MB

1 stereo track 
5 minutes

50 MB

55 MB

75 MB

83 MB

100 MB

110 MB

150 MB

164 MB

1 stereo track
60 minutes

600 MB

662 MB

900 MB

991 MB

1.2 GB

1.3 GB

1.8 GB

2 GB

32 mono tracks
5 minutes 

800 MB

883 MB

1.2 GB

1.4 GB

1.6 GB

1.8 GB

2.4 GB

2.8 GB

32 mono tracks
60 minutes

9.4 GB

10.4 GB

14 GB

15.5 GB

18.8 GB

20.8 GB

28 GB

31 GB

Summary of Contents for Digi 002


























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands