manualshive.com logo in svg

DigiDesign Digi 002, Getting Started

Share
Download
DigiDesign Digi 002 Getting Started Download Page 125

Appendix C: Digidesign WaveDriver (Windows Only)

117

appendix c

Digidesign WaveDriver (Windows Only)

Introduction

The Digidesign WaveDriver is a single-client, 
multichannel sound driver that allows third-
party audio programs that support the 
WaveDriver MME (Multimedia Extensions) 
standard to play back through the following 
Digidesign audio interfaces:

• Pro Tools|HD audio interfaces

• Digi 002

• Digi 002 Rack

• Mbox

Playback of 24- and 16-bit audio are supported 
at sample rates of up to 48 kHz, as supported by 
the hardware and WaveDriver program used.

The Digidesign WaveDriver will provide 2 chan-
nels of output.

Compatibility

This version of Digidesign WaveDriver can be 
used on Digidesign-qualified Pro Tools systems 
running on Windows XP.

Compatible Software

For a list of WaveDriver-compatible software, 
see the compatibility page of the Digidesign 
Web site (www.digidesign.com/compato).

Digidesign can only assure compatibility and 
provide support for hardware and software it 
has tested and approved.

The WaveDriver is not multi-client. Only 
one application at a time can use the 
WaveDriver. Be sure to disable the Win-
dows system sounds. It is also recom-
mended that you use a separate sound card 
for games or other general work. For third-
party soft-synthesizer and samplers, use the 
Digidesign ASIO Driver (refer to the ASIO 
Driver Usage Guide).

Check the Digidesign Web site 
(www.digidesign.com) for the latest third-
party drivers for Pro Tools hardware, as 
well as current known issues.

To use Digidesign WaveDriver without 
Pro Tools, use the stand-alone version of 
the Digidesign WaveDriver. The stand-
alone version of Digidesign WaveDriver is 
available on the Digidesign Web site 
(www.digidesign.com)

Summary of Contents for Digi 002


























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands