DigiDesign Digi 002, Getting Started

Page: 118 / 153

Getting Started with Digi 002 & Digi 002 Rack 110
Storing Snapshots
Digi 002 allows you to store up to 24 stand-
alone mix configurations and recall them at any
time. You can use snapshots to create mix tem-
plates or to capture a mix in progress.
A 25th mix configuration, containing stand-
alone system defaults, can be recalled, but can-
not be modified or renamed.
Snapshots store the following information for
each input channel:
• Channel name
• Channel fader position
• Channel pan position
• EQ and compressor settings
• Send levels
To store a snapshot of a mix configuration:
1
Arrange mixer controls, name channels, and
set effects controls as desired.
2
Return to Home View by pressing the Pan
switch in the upper left-hand corner of the Con-
sole View area.
3
Press F3 (Snapshot).
4
Press the Channel Select switch under Save.
5
Turn the Rotary Encoder under the snapshot
number to set the number (1–24).
6
Press the Left and Right Arrow keys in the
Navigation Section of Digi 002 to move the cur-
sor in the Scribble Strip display.
7
If you want to rename the snapshot, press the
Left and Right Arrow keys in the Navigation Sec-
tion, and turn the Rotary Encoder under the
snapshot number to change each character in
the snapshot name.
8
Press the flashing Channel Select switch to
save the snapshot, or press the Escape switch
twice to cancel the operation and return to
Home View.
To recall a snapshot:
1
Return to Home View by pressing the Pan
switch in the upper left-hand corner of the Con-
sole View area.
2
Press F3 (Snapshot).
3
Press the Channel Select switch under Load.
4
Turn the Rotary Encoder under the snapshot
number to recall the desired snapshot. (Snap-
shot #25 returns Digi 002 to its default settings.)
5
Press the flashing Channel Select switch to
load the snapshot, or press the Escape switch
twice to cancel the operation and return to
Home View.