manualshive.com logo in svg

DigiDesign Digi 002, Getting Started

Share
Download
DigiDesign Digi 002 Getting Started Download Page 101

Chapter 8: Working with Pro Tools LE

93

Real-time plug-ins are assigned to tracks from 
the Inserts view in the Mix or Edit windows. 
Once assigned to a track, plug-ins appear in the 
track’s Inserts view, and can be opened by click-
ing the Insert button.

To insert a real-time plug-in on a track:

1  

Make sure the Inserts View is shown in the 

Mix or Edit window.

2  

Click the Insert Selector on the track and se-

lect the plug-in that you want to use.

Pro Tools comes with a complete set of DigiRack 
plug-ins, and many more are available from 
Digidesign and our Development Partners. 

Mix Automation

Mix automation lets you record, or 

automate

, 

changes to track and send levels, mutes, pan, 
and plug-in parameters. MIDI tracks provide 
volume, pan, and mute automation only.

To write automation:

1  

In the Automation Enable window 

(Windows > Show Automation Enable), enable 
an automation 

type

 (volume, pan, mute, send 

level, send pan, send mute, or any plug-in auto-
mation).

2  

Select an automation 

mode

 for the tracks to be 

automated (Write, Touch, or Latch mode). 

3  

Start playback and begin writing automation 

by adjusting faders and other controls during 
playback. Pro Tools LE remembers all moves 
performed on enabled parameters.

Compressor plug-in

For more information about plug-ins, see 
the DigiRack Plug-Ins Guide. 

Plug-In window

Insert button

Enabling automation (left) and choosing a track 
Automation mode (right)

Summary of Contents for Digi 002


























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands