DigiDesign Digi 002 Getting Started Download Page 78

Page: 78 / 153

Getting Started with Digi 002 & Digi 002 Rack

Type a name for your session.

Click Save. The new session opens its Mix,

Edit, and Transport windows (see Figure 7 on
page 70).

Main Windows

The Mix, Edit, and Transport windows are the
main Pro Tools work areas. You can show any of
these windows by choosing them from the Win-
dows menu.

Mix Window

Displays the Pro Tools mixer, with

its familiar fader strip controls for volume, pan,
solo, mute, and signal routing.

Edit Window

Displays tracks in the session along

the Timeline, for editing of audio, MIDI, and au-
tomation data.

Transport

Provides standard transport controls

for Play, Stop, Rewind, Fast-Forward, Pause, and
Record. The Transport window can also show
Counter and MIDI Control displays.

Workspace

The Workspace browser is a DigiBase

feature available in Pro Tools 6 and higher. For
more information see the

DigiBase Guide

Press ”=” on Macintosh, or
Ctrl+”=” on Windows to switch between
the Edit and Mix windows.

Figure 7. Main session windows

Tracks

Transport window

Mix window

Edit window

Main Counter

Tracks

Rulers

Summary of Contents for Digi 002


























































































































































Search results

Summary of Contents for Digi 002

Reviews:

Brands by name

Popular brands

DigiDesign Digi 002, Getting Started

Search results

Summary of Contents for Digi 002

Reviews:

Brands by name

Popular brands