DEUTZ-FAHR MP135 R, Operation Manual

Page: 55 / 62

53
EN
16652807_en 05/2006
7.3.1 Sensor for bale ejection
In combination with the bale conveyor, confirmation
can be given that the bale has been ejected. A sensor
is responsible for this together with an acoustic signal
on the “Autoform” control unit which sounds once the
bale conveyor has returned to its initial position.
7.4 Additional twine box
To increase the twine supply, it is possible to mount an
additional twine box onto the right-hand side of the
machine. The size of the twine compartment (height
300 mm, length/width 265 mm) means that 6 rolls of
twine can be contained in the stepped box.
7.5 Extension cable for "Autoform"
When using special tractors where the distance from
the tractor cab to the baler is longer than usual, it is
possible to unfasten the "Autoform" cable on the rear
wall of the box (screw fitting) and to use a 1.5 m
extension.
7.6 Hydraulic oil filter
When the press is used on several different tractors,
there is a risk of clogging as a result of frequent
connecting and disconnecting. A hydraulic oil filter can
be integrated in the hydraulic system in order to prevent
malfunctions.