DEUTZ-FAHR MP135 R, Operation Manual

Page: 31 / 62

29
EN
16652807_en 05/2006
Attach the control box inside the tractor cab as
described in section 4.2. The hydraulic functions of pick-
up and cutting mechanism are activated using the single
acting control unit. One function only can be
preselected. Only one function can be preselected on
the „Autoform“. The LED above the activated function
lights up. The tailgate is not controlled by the control
box, but directly by the double acting control unit. When
the control box is switched on, a self test takes place. If
the self test is successfully completed, the screen displays
one of the following messages:
„ - -„
Pto switched off
„RUN“ Pto switched on
„E #“ Error / malfunction with code number
Messages displa Messages displa
Messages displa Messages displa
Messages displayyyyyed dur ed dur
ed dur ed dur
ed during oper ing oper
ing oper ing oper
ing operation: ation:
ation: ation:
ation:
„RUN“ Machine to be started, machine in
operation, tailgate closed
„90%“ Alerts the driver when 90% of the
preselected bale density has been
reached (to swing cutting knives clear
see information below)
„STOP“ Alerts the driver when the preselected
bale density is reached. When in the
automatic mode the selected wrapping
program starts automatically. In the
manual mode the tying cycle has to be
started by pressing button (4) = net or
(5) = twine.
„BIND“ Shows that twine or net wrapping is
running.
„OPEN“ Alerts the driver when the wrapping
process is completed and the bale has
to be ejected.
Ot Ot Ot Ot Other displa her displa her displa her displa her display messages: y messages: y messages: y messages: y messages:
„0-99999“ Day / total bale counter
„1,5...8,0“ Programming the number of net wraps
„14...28“ Programming the number of twine wraps
„120-210“ Twine edge adjustment
„CUT 0/1“ Automatic blade swivel device
„E ##“
Error indication with code number; see
below
A
PROG PROG PROG *)
*) RESET = POWER OFF-ON + PROG + C
PROG