DEUTZ-FAHR MP135 R, Operation Manual

Page: 35 / 62

33
EN
16652807_en 05/2006
Indication of er Indication of er Indication of er Indication of er Indication of errrrrror or or or ors / malfunctions: s / malfunctions: s / malfunctions: s / malfunctions: s / malfunctions:
All important functions are continually surveyed during operation and if a problem occurs the screen
will display an E # message and the buzzer will create an intermittent audible warning.
The error symbol appears periodically on the screen until the problem has been overcome.
E-01 net not running
E-02 net runs on unless cut off, or starts up automatically
E-03 tailgate open
E-04 cutting bar of net wrap system not under tension
E-05 linear motor of net wrapping system not operative
E-06 insufficient smoothness in operation of the twine wrapping motor
E-07 -
E-08 -
E-09 power supply insufficient - possibly check cable
E-99 electronic defect, system fault
Emer Emer
Emer Emer Emergency contr
gency contr
gency contr gency contr gency control of t
ol of t
ol of t ol of t ol of the wr
he wr
he wr he wr he wrapping sys
apping sys
apping sys apping sys apping systttttem:
em:
em: em: em:
If problems occur during the wrapping cycle the
electronic control system can be overridden and the
net or twine wrapping system can be controlled
manually.
Warning !
Even when in emergency mode, all
protective coverings must be kept closed.
Risk of injury!
Caution !
The wrapping cycle is running as long as
you keep pressed toggle switch (11) of
the control box. This function is not
provided for continuous operation but
should only be used to wrap just the bale
which is in the bale chamber when the
problem occurs. The malfunction should
then immediately be repaired.