DEUTZ-FAHR MP135 R, Operation Manual

Page: 39 / 62

37
EN
16652807_en 05/2006
5.3.1.2 Adjusting the cutting angle
Blade shaft, pos. 1
-
steep cutting angle for ‘precision cutting’
Blade shaft, pos. 2
-
obtuse cutting angle for ‘normal cutting’
(approx. 20% lower power consumption)
Adjusting the cutting angle from ‘normal cutting’ Adjusting the cutting angle from ‘normal cutting’
Adjusting the cutting angle from ‘normal cutting’ Adjusting the cutting angle from ‘normal cutting’ Adjusting the cutting angle from ‘normal cutting’
to ‘precision cutting’:
to ‘precision cutting’: to ‘precision cutting’: to ‘precision cutting’: to ‘precision cutting’:
z Move out the cutting system hydraulically, switch
off the tractor engine
z Unscrew fixing bolt M10 (a) on the left and right-
hand sides,
z
Undo the hinge screw M10 (b) on the left and
right-hand sides,
z Move in the cutting system hydraulically, switch off
the tractor engine,
z Assemble fixing screws (a) in the upper position,
z Tighten the fixing and hinge screws (a, b) at the left
and right.
A A
A A Adjus
djus
djus djus djusting t
ting t
ting t ting t ting the cutting ang
he cutting ang
he cutting ang he cutting ang he cutting angle fr
le fr
le fr le fr le from ‘pr
om ‘pr
om ‘pr om ‘pr om ‘precision cutting’ t
ecision cutting’ t
ecision cutting’ t ecision cutting’ t ecision cutting’ tooooo
‘nor ‘nor ‘nor ‘nor ‘normal cutting’: mal cutting’: mal cutting’: mal cutting’: mal cutting’:
z
Move in the cutting system hydraulically, switch off
the tractor engine,
z Unscrew fixing bolt M10 (a) on the left and right-
hand sides,
z Undo the hinge screw M10 (b) on the left and
right-hand sides,
z
Move out the cutting system hydraulically, switch
off the tractor engine,
z
Assemble fixing screws (a) in the lower position,
z Tighten the fixing and hinge screws (a, b) on the
left and right-hand sides.