DEUTZ-FAHR MP135 R, Operation Manual

Page: 18 / 62

16
EN
16652807_en 05 /2006
1.9 Safety when not in use and in storage
1. Store the device in a safe place.
2. Never allow children to play on or around the device.
3. Never couple or decouple the device on anything but firm, dry and level ground. This reduces the
risk of overturning or sinking into soft ground or mud.
4. Lay down the decoupled universal drive shaft on the mount provided.
1.10 Maintenance
Direction signs (‘to the right’, ‘to the left’, ‘to the front’, ‘to the back’) apply to the direction of travel.
The direction of rotation is defined as follows:
z
direction of rotation right = clockwise,
z direction of rotation left = anti-clockwise,
z rotation about a perpendicular axis, viewed from top to bottom,
z rotation about a horizontal axis, at right angles to the direction of travel, viewed from left to right,
z rotation of bolts, nuts and similar, always viewed from the operating side.
1. Repair, maintenance and cleaning work and the elimination of malfunctions may only ever be
carried out when the drive mechanism is switched off and the engine is at a standstill. Remove
ignition key.
2. Check nuts and bolts regularly to ensure that they are tight and re-tighten if necessary. Keep to the
torques given. (See Appendix A.1 for torques for bolt connections).
3. When carrying out maintenance work on the raised device/unit, always secure with suitable supports.
4. When interchanging work tools, use suitable tools and wear gloves.
5. Dispose of oils, grease and filters properly.
6. Always disconnect the current supply before carrying out work on the electrical system.
7. If protective equipment is subject to wear and tear, it is to be checked regularly and replaced in
good time.
8. Disconnect cable to generator and battery when carrying out electrical welding work on the tractor
and attached devices.