DEUTZ-FAHR AGROTRON 106 MK3, Workshop Manual

Page: 9 / 150

00-7
HOW TO USE AND UPDATE THE MANUAL
1. UPDATING THE MANUAL
All additions, corrections or amendments to the manual will be sent to the Authorised Service Centres.
Before starting any repair or overhaul operations, check that you have the most recent updates as these may contain
supplementary data not present in previous issues.
2. INSERTING UPDATES
1- Check the number of the page and insert it in the appropriate section of the manual following the consecutive or-
der of the page numbers. Example:
2 - Supplementary pages: indicated with a hyphen (-) and consecutive number after the page number. Example:
NOTE. The contents of supplementary pages are structured so that there is no overlap with existing pages.
3 - Updated pages: indicated by a consecutive number in a circle; this symbol appears below the page number.
Example:
NOTE. All supplementary and updated pages are indicated in the manual page list; a revised page list is
sent with each update and supersedes the previous list.
3. SYMBOLS USED IN THE MANUAL
For greater clarity, important information pertaining to operator safety and to critical stages in the working proce-
dures is highlighted by the symbols shown in the following table.
Symbol Meaning Notes Symbol Meaning Notes
Safety
Safety rules to be applied during
operation.
Coating
Parts must be coated with adhesive,
lubricant, etc.
Operation requiring special safety
measures due to internal pressure.
Oil, water
Points at which oil, water or fuel
must be added and quantity requi-
red.
★
Warning
Operations requiring special techni-
cal or other precautionsto ensure
compliance with standard values.
Drain
Points from which oil, water or fuel
must be drained with quantity.
Weight
Weight of main assemblies.
Choose lifting ropes/slings careful-
ly; supports required, etc.
Tightening
torques
Parts requiring special tightening
torque during refitting or assembly.
20 5
Section number
Consecutive page number
20-5
20-5-1
20-5-2
20-6
Supplementary page
20-5
20-5-1
20-5-1
20-5-2 Existing page
Update page
Existing page
HOW TO UPDATE THE MANUAL