DEUTZ-FAHR AGROTRON 106 MK3, Workshop Manual

Page: 122 / 150

20-4
1.2.2 ORDERING SINGLE PARTS
1.2.3 Adapter
Some OEMs have different diagnostics plugs for certain versions. An adapter is therefore required for the interface from the
12 pole DE UTZ plug to the appropriate OEM plug.
The DEUTZ 12 pole counterpart is available as a genuine DEUTZ part.
A ready-made adapter is available, for diagnostics on engines in DE UTZ Fahr tractors (DEUTZ 12 pole -> DFA 14 pole):
DEUTZ Part No. 5.9030.741.0
1.3 SWITCH ON NOTEBOOK AND INSTALL SOFTWARE
1.3.1 INSTALLING MS WINDOWS®
If you do not already have MS Windows® or Windows95(98) installed on your hard disk, you must do this first of all, fol-
lowing the instructions for installation given for MS Windows® and Windows95(98).
1.3.2 INSTALLING SERDIA
Before you begin installation, you must first make sure that all applications are closed. To be sure, you should therefore
leave MS Windows® and start anew.
In order to operate SERDIA software, you require an interface with a connection to an engine ECU. If this interface is not
available, it is still possible to install SERDIA, but you will only be able to operate it in offline mode. Chapter 1.6.2 Offline
mode tells you which program restrictions this involves.
TO INSTALL:
• Switch on the computer
• Insert the SERDIA installation disk in the 3.5" disk drive (drive A:).
• Start Windows.
With Windows 3.11 (3.1):
• In the main group, open "File manager" by double clicking on the symbol using the mouse.
• Select disk drive A:
• Start "install.exe" by double clicking with the mouse.
• Follow the installation instructions appearing on the screen.
• Remove the installation disk from the disk drive and keep safe.
• After re-starting, open the "SERDIA" program group by double clicking.
• Start "Diagnostics Service" by double clicking.
With Windows 95 (98):
• Open "Desktop" by double clicking.
• Open "3.5 disk (A:)" by double clicking.
• Start "install.exe" (Run Me!) by double clicking.
• Follow the installation instructions on the screen.
• Remove the installation disk from the disk drive and keep safe.
• After re-starting, click on the "Start" button and select the "Programs" folder.
• Start the program "Diagnostics service" in the "Serdia" sub-menu.
Ser. No. Part Competence level Re-order No.
T7 Installation diskette 5.9030.740.0
T8 Adapter 5.9030.741.0
T9 Interface level III Major overhaul 5.9030.740.2
SERDIA ENTRY AND COMUNICATION