DEUTZ-FAHR AGROTRON 106 MK3, Workshop Manual

Page: 143 / 150

20-25
MK 3 TTG Parameter Unit Min. Max.
typ
Wert
Description
Page 11: Assignment inputs/measured values
Ass (F18) Inp/PWM1 0 3999 1
(F18) Input: Digital / PWM 1
(PWM setpoint)
Ass (F21) Inp/PWM2 0 3999 2
(F21) Input: Digital / PWM 2
(PWM setpoint alternate to F18)
Ass (F24) AnaInp1
(Pedal)
0 3999 3511
(F24) Input: Analog 1
(accel.pr. sensor)
Ass (M24) AnaInp2
(boostPr)
0 3999 3531
(M24) Input: Analog 2
(boost pr. sensor)
Ass (M9) AnaInp3
(CoolTemp)
0 3999 3551
(M9) Input: Analog 3
(coolant temp. sensor)
Ass (M21) AnaInp4
(OilPress)
0 3999 3541
(M21) Input: Analog 4
(oil pr. sensor)
Ass (F20) DigAnaInp
(H.thr.)
0 3999 3521
(F20) Input: Digital / Analog
(hand throttle)
Monitoring delay 0 50 1 ON delay of input monitoring
Page 12: Assignment switch inputs/functions
Max. 5 inputs can be
assigned to the total
of 7 switch inputs.
If the sign is changed, the switch positions (open/closed) are reversed.
1 = Input Digital / PWM 1 (Pin F18)
2 = Input Digital / PWM 2 (Pin F21)
3 = Input Digital (Pin F19)
4 = Input Digital / Analog (Pin F20)
5 = Input AnaInput4 (Pin M21)
6 = F3 is input (only for ECU 0211 2088)
Example:
AssInpTorque curve switching betw.1 / 2: Entry -3: At Input Pin F19 the torque curve can be
switched:
closed = torque curve 2
open = torque curve 1
Entry 3: At Input Pin F19 the torque curve can be switched:
closed = torque curve 1
open = torque curve 2
AssInp:torque curve 1 or 2 -5 5 3 Switching between two torque curves
AssInp:speed droop 1 or 2 -5 5 2 Switching between two fixed speed droops
AssInp:speed specificationi -5 5 1 Switching between two eng. speeds
AssInp:governor type -5 5 4 Switching between two governor types
AssInp:lower engine speed -5 5 0 Fixing lower eng. speed
AssInp:upper engine speed -5 5 0 Fixing upper eng. speed
AssInp:hold engine speed -5 5 0 Holding eng. speed
AssInp:selector switch -5 5 5 Selector switch
Page 13: Assignment outputs/measured values
PWMfreq. for all inp/outp Hz 50 500 100
Ass (F16)
Out/Dig/PWM/Freq
-3999 3999 2000
(F16) Output: Digital / PWM / Frequency
(Eng. speed 1)
Ass (F5) Out/Dig/PWM1 -3999 3999 2701 (F5) Output: Digital / PWM 1 (torque)
Ass (F3) Out/Dig/PWM2 -3999 3999 3011
(F3) Output: Digital / PWM 2
(Warn.sign. KMT)
Ass (M3) Out/Dig3/PWM3 -3999 3999 0 (M3) Output: Digital / PWM 3
Ass (F4) OutputDig1 -3999 3999 3200
(F4) Output: Digital
1 (error pilot light)
Zuw (F15) OutputDig2 -3999 3999 3013
(F15) Output: Digital 2
(Warn.sign. oil pr.)
Zuw (M2) OutputDig3 -3999 3999 3201
(M2) Output: Digital 3
(solenoid)
SERDIA PARAMETERS