DEUTZ-FAHR AGROTRON 106 MK3, Workshop Manual

Page: 149 / 150

20-31
✽
See also system description EMR, Chapter 3 System functions.
MK 3 TTG Parameter Unit Min. Max.
typ
Wert
Description
Page 38: CAN: (7740)SwitchoverRelease: Governor, speed droop, limiting curve, preset engine speed
Shift mask: setpoint speed 0 63 8
Shift mask: limiting curve 0 7 0
Shift mask: speed droop 0 7 0
Shift mask: governor mode 0 7 0
Page 39: CAN: (7662)EMR-fault message via OiagTelegr. (on/off)
Setpoint generator 1 0 1 1
Setpoint generator 2 0 1 1
Boost pressure sensor 0 1 1
Coolant temperature sensor 0 1 1
Oil pressure sensor 0 1 1
Electronics temperature 0 1 1
Eng Speed Sensorl
Eng Run
0 1 1
Eng Speed Sensor 2
Eng Run
0 1 1
Rack Travel Sensor not vibr. 0 1 1
Oversp. only during shutd. 0 1 1
Actuator deviation excessive 0 1 1
Coolant Temp. high (alarm) 0 1 1
Coolant Temp. high
(shutdown)
0 1 1
Oil pressure low (alarm) 0 1 1
Oil pressure low (shutdown) 0 1 1
PWM Input 2 0 1 1
PWM Input 1 0 1 1
Fault data set 0 1 1
Fault hardware parameters 0 1 1
Fault CAN 0 1 1
Fault CAN, voltage too low 0 1 1
Fault shutdown solenoid 0 1 1
Fault EDC Auto Regulation 0 1 1
SERDIA PARAMETERS