DEUTZ-FAHR AGROTRON 106 MK3, Workshop Manual

Page: 141 / 150

20-23
MK 3 TTG Parameter Unit Min. Max.
typ
Wert
Description
Page 5: Position governor
Only change the following 10 parameters in consultation with the head office
Posgvnr: P part % 0 100 10 Gain factor P part
Posgvnr: 1 part % 0 100 5 Gain factor I part
Posgvnr: D part % 0 100 5 Gain factor D part
Posgvnr: DT2 part % 0 100 10 Gain factor DT2 part
Posgvnr: Gain % 100 200 180,1 Gain factor with minor speed fluctuation
Posgvnr: gain range mm 0 1 0,25 Gain fluctuation range for gain factor
QuickCurrentDecSteepness 1/min 0 65535 40000
QuickCurrentDecTime ms 0 65535 50
Page 6: Functions
Assign config. top curve 0 2 0
Torque curve variants (2 variants
✽
),
Perm, values:
0 = torque curve 1
1 = Switching betw. torque curves 1+2
Ass spec. eng. speed config 0 6 0
Setpoint eng. speed values (6 variants
✽
)
Perm, values:
0 = Only variable speed governing
1 = Switching betw. eng. speeds 1 and 2
2 = Switching betw. fixed / variable speed
3, 4 = Switching betw.speed variable / save:
(3 = w. setp.speed, 4 = w. actual speed)
5 = two setpoint transmitters
Ass droop config 0 3 0
Speed droop selection (4 variants
✽
)
Perm, values:
0 = constant speed droop
1 = variable speed droop
2 = switching between speed droop 1 and 2
3 = switching betw.const. / variable speed droop
Ass governor config 0 6 0
Type of governing (4 variants
✽
)
Perm, values:
0 = Variable-speed governing
1 = Min-max-speed governing
2 = Switching betw.var./min.-max.
speed governingx
For the following 14 functions: On = 1, Off = 0
BoostPressSim (on/off) 0 1 0 Boost pressure simulation
BoostPressMeas (on/off) 0 1 1 Boost pressure measurement
EngSpeed sensor2 (on/off) 0 1 0 Redundant eng. speed sensing
VehSpeedLimit (on/off) 0 1 1 Veh. speed limit
CylinderShutoff (on/off) 0 1 1 Overrun cond. with overspeed
LimpHomeOper 0 1 0 Limp-home upon control rod travel sensor failure
Torque Indicator(on/off) 0 1 1
Torque computation (off: referred to torque curve,
on: torque curve point)
SAME Output (on/off) 0 1 0 Customer-specific output function
QuickCurrentDec (on/off) 0 1 0
BOSCH EDC inline p. (on/off) 0 1 0
TempMonitoring (on/off) 0 1 0 Temperature monitoring
OilPressMon(on/off) 0 1 0 Oil pressure monitoring
SERDIA PARAMETERS