DEUTZ-FAHR AGROTRON 106 MK3, Workshop Manual

Page: 140 / 150

20-22
ATTENTION!
• All changes to the configuration have to be reported!
• The reporting procedure is described in Service Bulletin 0199-99-9287.
Previous: The reporting procedure is described in Service Bulletin 0199-99-9287 .
Next: Displays data for the next screen page.
Print ON: A print-out is made of the configuration data currently displayed.
4.1.1 EMR
.
1 - The following table gives an overview of the possible configuration parameters.
2 - Settings that cannot be made while the engine is running are identified by the message ”Stop engine”
3 - SERDIA only displays one page at a time.
EMR PARAMETERS CONFIGURABLE WITH LEVEL III
MK 3 TTG Parameter Unit Min. Max.
typ
Wert
Description
Page 1: General overview
Engine serial number 0 4,2x10
9
12345678 8 digits
Number of cylinders 4 8 ace. to engine type
No. of teeth eng. speed 2
48 1013
44 1012
18 200 129
PassLevel 1 (OEM) 0 4,2x10
9
PassLevel 2 (Service) 0 4,2x10
9
Page 2: Only for BOSCH EDO inline pumps
RefVal.EDC RackPos 20 mm 0 65535 4000
RefVal.EDC RackPos. 0 mm 0 65535 1800
RefVal.EDCValueRefCoil 0 65535 1800
AutoCalib:Current % 0 100 78,2
AutoCalib:WaitingTime s 0 100 1,0
Page 3: Engine speed settings
Idling speed 1/min 500 4000 770 Idling speed engine ( < rated speed)
Fixed eng. speed 1 1/min 500 4000 1000 Fixed speed setpoint 1
Fixed eng. speed 2 1/min 500 4000 1000 Rated speed engine
Rated speed 1/min 500 4000 2300 Fixed speed setpoint 2
Rated speed limp home 1/min 500 4000 2000 Rated speed upon failure of speed sensor 1
Overspeed 1/min 500 4000 3000 Limit overspeed
Recov. speed overrun 1/min 500 4000 2000 Reset limit overspeed
average:0=1 turn, 1=2 turns 0 1 0 Average speed smoothing
Page 4: Speed governor
SpeedGvnr: P part % 0 100 18/4,0 Gain factor P part (genset/automotive)
SpeedGvnr: I part % 0 100 10/10,0 Gain factor I part (genset/automotive.)
SpeedGvnr: D part % 0 100 10/5,0 Gain factor D part (genset/automotive)
SpeedGvnr: damping % 0 100 90/65,1
Damping factor w. minor speed fluctuation
(genset. /automotive)
SpeedGvnr: damping range 1/min 0 100 15/80,0
Speed governor:
damping range (gensets/ automotive)
Engine speed ramp down 1/min/s 0 10000 100 Max. contr. speed setpoint speed ramp down
Engine speed ramp up 1/min/s 0 10000 10,1 Max. contr. speed setpoint speed ramp up
SERDIA PARAMETERS